Qtutor Guide

Class 12 Physics Semiconductor Electronics Question Bank PDF

Read full chapter notes: Semiconductor Electronics: Materials, Devices and Simple Circuits (Class 12 Physics) →

Semiconductor Electronics: Materials, Devices and Simple Circuits - Class 12 physics Notes (PDF · 53 pages · ₹49) Buy the full PDF for ₹49

Preview: first 2 pages

Semiconductor Electronics: Materials, Devices and Simple Circuits - Class 12 physics Notes PDF, page 1
Semiconductor Electronics: Materials, Devices and Simple Circuits - Class 12 physics Notes PDF, page 2

Free sample: pages 1 to 2 of 53. The full PDF costs ₹49.

A phone charger takes 230 V, 50 Hz mains and hands the battery about 5 V dc: a transformer steps the voltage down, diodes rectify it and a capacitor smooths it. Case study D1 of this question bank is built on that charger. The PDF is a question bank for Class 12 Physics, Chapter 14, Semiconductor Electronics: Materials, Devices and Simple Circuits. It runs to 53 pages and contains 100 questions in the five-section pattern of the CBSE Class XII Physics sample paper for 2026-27, with a model answer printed under each question. It is a paid PDF priced at Rs 49. QTutor prepared it from NCERT Physics Part II, Chapter 14. The questions are new practice questions; the file is not an official CBSE or NCERT publication.

What is included

  • 100 questions with model answers in Sections A to E, 20 in each
  • Multiple-choice and assertion-reason questions (1 mark)
  • Short-answer and structured questions (2 and 3 marks), some asking for a diagram or a graph
  • 20 case studies (4 marks) on everyday devices
  • Long-answer questions (5 marks), several with an internal choice
  • 12 internal-choice questions in all, with both alternatives answered
  • 19 diagrams and graphs
  • A chapter coverage table on page 53

Structure

SectionQuestion typeQuestionsMarks eachStarts on page
AObjective and assertion-reasoningA1 to A2013
BShort-answer applicationB1 to B2029
CStructured and analyticalC1 to C20318
DCase-study-basedD1 to D20428
ELong-answer and higher-orderE1 to E20538

Key topics covered

Questions per topic, as counted in the coverage table:

  • Energy bands: 19
  • Extrinsic semiconductors: 17
  • Rectifiers: 17
  • Forward bias: 12
  • V-I characteristics: 11
  • Intrinsic semiconductors: 9
  • Reverse bias: 8
  • Formation of the p-n junction: 7

Sample from this PDF

Answers are shortened here. The bank takes the band gaps as 5.4 eV (diamond), 1.1 eV (Si) and 0.7 eV (Ge), and the cut-in voltages as 0.7 V (Si) and 0.2 V (Ge).

Section A (1 mark)

  1. The energy gap of silicon is about (a) 0.07 eV (b) 1.1 eV (c) 5.4 eV (d) 11 eV. Answer: (b).
  2. The depletion region of a p-n junction contains: Answer: immobile ions.
  3. As the temperature of a pure semiconductor increases, its resistivity: Answer: decreases.
  4. A hole in a semiconductor is: Answer: a vacancy left by an electron in a covalent bond, with an effective positive charge.

Section B (2 marks)

  1. Explain how an n-type semiconductor is formed from silicon. Answer: silicon is doped with a pentavalent impurity such as arsenic or phosphorus; four of its five valence electrons form bonds and the fifth is loosely bound, so it is freed with very little energy.
  2. What happens to the barrier height and the width of the depletion region in forward bias? Answer: both decrease.
  3. Why is silicon preferred to germanium for diodes that work at higher temperatures? Answer: silicon has the larger band gap (1.1 eV against 0.7 eV), so fewer carriers are produced thermally and the reverse current stays small.

Section D (case study)

  1. In a phone charger with a full-wave rectifier on 50 Hz mains, what is the frequency of the output pulses, and what does the capacitor do? Answer: 100 Hz; the capacitor charges to the peak and discharges slowly through the load, smoothing the pulsating dc.
  2. A torch has a silicon diode in series with its LED driver and 3.0 V batteries. What voltage reaches the circuit, and why is it protected if the batteries are reversed? Answer: 3.0 − 0.7 = 2.3 V; with the batteries reversed the diode is reverse biased and passes almost no current.

Section E (5 marks)

  1. Find the longest wavelength of light that can produce electron-hole pairs in germanium. Answer: λ = 1243/0.7 ≈ 1780 nm.

How it helps

  • Questions tagged "diagram-based" and "graph / data" ask for band diagrams, biasing circuits and the V-I characteristic, so the drawings of the chapter get practice
  • Rectifiers have 17 questions in the coverage table
  • The case studies connect the chapter to devices students handle, such as chargers and torches
  • Reasoning questions, such as why silicon is preferred to germanium and why the reverse current rises sharply at breakdown, give practice in writing short explanations

Who should use it

  • Class 12 CBSE students revising Semiconductor Electronics, Chapter 14 of the NCERT Physics textbook
  • Students who can read the chapter but have not practised drawing its circuits under time pressure
  • Teachers and tutors who want case studies and assertion-reason items on semiconductors with answers

Download the PDF

Semiconductor Electronics: Materials, Devices and Simple Circuits - Class 12 physics Notes (PDF · 53 pages · ₹49)

On the Class 12 Physics Semiconductor Electronics chapter page this is the 53-page question bank.

Related resources

Frequently asked questions

Which parts of the chapter does the bank cover?

The cover lists energy bands and the classification of solids, intrinsic and extrinsic semiconductors with nₑnₕ = nᵢ², formation of the p-n junction, the diode under forward and reverse bias, V-I characteristics and dynamic resistance, and half-wave and full-wave rectifiers with a capacitor filter.

Are there numericals in this chapter's bank?

Yes. About a third of the questions carry a "numerical" tag. Examples are the voltage left for a circuit after a diode drop, the output frequency of a rectifier and the wavelength that matches a band gap.

Are the model answers an official marking scheme?

No. Page 2 says the marking notes are guidance for practice and not an official CBSE marking scheme.

How are assertion-reason questions set?

Section A opens with the four standard options (A to D) for assertion-reason items, and the model answer under each item names the correct option.

What is the price?

Rs 49. It is a paid file.

For every diagram question, draw the diagram first and label it before writing a word; then let each sentence of the answer refer to a label. The file is on the Semiconductor Electronics chapter page.

More PDFs for this chapter

Browse CBSE study materials by class

Guides