Qtutor Guide

Class 12 Chemistry Electrochemistry Competency-Based Question Bank PDF

Read full chapter notes: Electrochemistry (Class 12 Chemistry) →

Electrochemistry- Class 12 chemistry Notes (PDF · 72 pages · ₹49) Buy the full PDF for ₹49

Preview: first 2 pages

Electrochemistry- Class 12 chemistry Notes PDF, page 1
Electrochemistry- Class 12 chemistry Notes PDF, page 2

Free sample: pages 1 to 2 of 72. The full PDF costs ₹49.

Which pair of electrodes gives the galvanic cell with the highest standard emf: Zn and Cu, Mg and Cu, Mg and Ag, or Zn and Ag? That is question A1 of this PDF, and its model answer works out 3.16 V for Mg and Ag against 1.10 V for the familiar Zn and Cu cell. The file is a chapter-wise competency-based model question bank for CBSE Class 12 Chemistry, Chapter 2 Electrochemistry, for the 2026-27 session. It runs to 72 pages, holds 100 question units, and every question is followed straight away by a model answer. It is priced at Rs 49. It was prepared by Qtutor and is not an official CBSE or NCERT publication; the PDF itself states that the questions are original practice questions and not official CBSE questions.

What is included

  • 100 question units, exactly 20 in each of Sections A to E
  • A model answer after every question, every OR alternative and every case-study sub-part, printed in a handwriting-style font
  • Suggested step-wise mark splits in red brackets inside the answers (a teaching aid, not an official marking scheme)
  • An "About this Question Bank" page explaining how the formats follow the CBSE Chemistry (043) Sample Question Paper pattern for 2026-27
  • A "How to use this bank" note, including the four Assertion-Reasoning response options
  • A chapter coverage table at the end that lists each topic and the question numbers that test it, plus a quality-check statement
  • Logarithm values supplied inside the questions, because calculators and log tables are not assumed

Structure

SectionQuestion typeMarks per unitQuestionsStarts on page
Front pagesCover, about the bank, how to use it, contents--1
AMCQs and Assertion-Reasoning1A1 - A204
BVery short answer, some with internal choice2B1 - B2012
CShort answer3C1 - C2019
DCase-based / data-based (1 + 1 + 2 with a choice in part III)4D1 - D2028
ELong answer with internal choice (A) OR (B)5E1 - E2048
End pagesChapter coverage and quality checks--up to 72

The bank is not a single timed paper. Sections D and E take up more than half of the pages because each case study and long answer is answered in full.

Key topics covered

  • Galvanic cells, electrode potentials and the standard hydrogen electrode
  • Nernst equation, including cells at non-standard concentrations
  • Equilibrium constant and Gibbs energy from cell emf
  • Conductance, conductivity, cell constant and molar conductivity
  • Variation of molar conductivity with concentration for strong and weak electrolytes
  • Kohlrausch's law and degree of dissociation
  • Electrolytic cells and products of electrolysis (inert and active electrodes, molten and aqueous)
  • Faraday's laws, cells in series and current efficiency
  • Batteries: dry cell, lead storage battery, nickel-cadmium cell, lithium cells
  • Fuel cells and corrosion, including sacrificial protection

Sample from this PDF

These questions are taken from the pages of the bank, with the answers shortened.

  1. A2. An iron tank buried underground is connected to a block of another metal to prevent rusting. Which is suitable: copper, lead, tin or zinc? Answer: Zinc. Its standard potential (-0.76 V) is more negative than that of iron (-0.44 V), so zinc becomes the anode and corrodes instead of iron.
  2. A3. How many faradays are needed to reduce 1 mol of permanganate ion to Mn2+ in acidic solution? Answer: 5 F, because manganese goes from +7 to +2.
  3. B8 (A). Write the electrode reactions of a lead storage battery during discharge. Answer: Anode: Pb + sulphate ion gives PbSO4 + 2 electrons. Cathode: PbO2 + sulphate ion + 4H+ + 2 electrons gives PbSO4 + 2H2O. Overall: Pb + PbO2 + 2H2SO4 gives 2PbSO4 + 2H2O.
  4. B10. Calculate the emf at 298 K of Zn | Zn2+ (0.001 M) || Cu2+ (0.10 M) | Cu, given a standard emf of 1.10 V. Answer: n = 2, so E = 1.10 - 0.0295 log (0.001/0.10) = 1.10 + 0.059 = 1.159 V.
  5. B11. A cell reaction involving 2 electrons has a standard emf of 0.59 V at 298 K. Find its equilibrium constant. Answer: log K = (2 x 0.59)/0.059 = 20, so K = 10 to the power 20. The reaction goes practically to completion.
  6. B12. Find the limiting molar conductivity of NH4OH from the values for NH4Cl (149.7), NaOH (249.2) and NaCl (126.4), all in S cm2 per mol. Answer: By Kohlrausch's law, 149.7 + 249.2 - 126.4 = 272.5 S cm2 per mol.
  7. D18 (IIIA). A solar-powered electrolyser splits water with a steady current of 100 A. What mass of hydrogen is produced in 1 hour? Answer: Charge = 100 x 3600 = 360000 C = 3.73 F. Two faradays give 1 mol of H2, so 1.865 mol, which is 3.73 g.
  8. E14 (B). A silver-plating bath runs at 1.5 A for 30 min, but only 2.70 g of silver is deposited (Ag = 108). Find the current efficiency. Answer: Charge = 2700 C; expected silver = 108 x 2700 / 96500 = 3.02 g; efficiency = 2.70/3.02, about 89%.

Other units you will find: a data table testing the Nernst equation on a nickel-copper cell (D1), a lithium-iodine pacemaker cell (D17), three electrolytic cells in series (E14 A) and a Daniell cell with an opposing external voltage (E15).

How it helps

  • Twenty units of each question type give enough practice to get used to every section of the board paper format
  • The marked steps show where a numerical earns its marks: the formula, the substitution, the answer and the unit
  • Case studies set the chapter in real situations such as electroplating, brine electrolysis, storage vessels and corrosion protection
  • The coverage table lets you pick all questions on one weak topic, for example Kohlrausch's law or Faraday's laws
  • Both alternatives of every OR question are answered, so no part is left unexplained

Who should use it

  • Class 12 students who have finished the NCERT chapter and want application-based practice before tests and the board examination
  • Students searching for a class 12 chemistry electrochemistry question bank with answers pdf that follows the current 1, 2, 3, 4 and 5 mark formats
  • Teachers and tutors who need ready case-based and long-answer questions with a suggested mark split
  • Parents who want a single file for chapter revision with worked answers to check against

Download the PDF

Electrochemistry- Class 12 chemistry Notes (PDF · 72 pages · ₹49)

This PDF is listed on the Electrochemistry chapter page. The same chapter also has a 20-page chapter-wise question paper with answer key; this question bank is the 72-page paid file, listed as "Electrochemistry- Class 12 chemistry Notes".

Related resources

Frequently asked questions

Is this a set of notes or a question bank?

It is a question bank. The site listing calls it "Notes", but the PDF contains 100 practice question units with model answers and no theory notes.

Does every question have an answer?

Yes. Each question, each OR alternative and each case-study sub-part is followed by a model answer on the same or the next page.

Are these previous years' CBSE board questions?

No. The PDF states that the questions are original practice questions written in the style of the CBSE Sample Question Paper, and that the mark splits shown are suggestions.

Will I need a calculator for the numericals?

No. The bank follows the board rule that calculators and log tables are not used; the log values needed are given in the question.

How is it different from the 20-page Electrochemistry question paper?

The question paper is one timed 70-mark paper of 33 questions with an answer key. This bank is for topic practice: it has 20 units of every question type and is about three and a half times as long.

Work through one section at a time: cover the model answer, write your own, then compare the steps and units line by line. For the Nernst and Faraday numericals, redo any question where your answer differs before moving on.

More PDFs for this chapter

Browse CBSE study materials by class

Guides