Chapter 1: Units and Measurement
Class 11 Physics notes: summary, key points, important questions and MCQs.
- Class 11
- Physics
- Chapter 1
- CBSE 2026–27
- Last updated: 18 Nov 2026
Chapter summary
Class 11 Physics Chapter 1 Units and Measurement (NCERT Physics Part I, CBSE 2026-27) explains how every physical quantity is measured as a number times a unit. It introduces base and derived units, the older CGS, FPS and MKS systems, and the International System of Units (SI) with its seven base units: metre, kilogram, second, ampere, kelvin, mole and candela, plus the radian and steradian for angles.
The chapter then teaches significant figures: which digits to report, how zeros are counted, scientific notation and order of magnitude, the rules for multiplying, dividing, adding and subtracting measured values, rounding off, and the uncertainty in calculated results. The last part covers dimensions of physical quantities, dimensional formulae and dimensional equations, and dimensional analysis, which is used to check whether an equation is consistent and to deduce relations among quantities. These ideas are used in every later chapter of Class 11 Physics.
Key points and definitions
- A measured value is a number multiplied by a unit; measuring means comparing with an accepted reference standard.
- Base units belong to base quantities; derived units are combinations of base units. Together they form a system of units.
- SI has seven base units: metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol) and candela (cd). Since the 2018 revision each is defined through an exact constant of nature.
- Plane angle dθ = ds/r is measured in radian (rad); solid angle dΩ = dA/r² is measured in steradian (sr). Both are dimensionless.
- Significant figures are the reliably known digits plus the first uncertain digit. A change of units never changes their number.
- Leading zeros are never significant; zeros between non-zero digits always are; trailing zeros are significant only when a decimal point is present.
- In multiplication or division, keep as many significant figures as the input with the fewest; in addition or subtraction, keep as many decimal places as the input with the fewest.
- Rounding: if the dropped digit is exactly 5, leave the preceding digit if it is even and raise it by 1 if it is odd. Carry one extra digit in intermediate steps.
- Order of magnitude: write the value as a × 10^b and round a to 1 (a ≤ 5) or to 10 (5 < a ≤ 10).
- Dimensions are the powers of the base quantities in a quantity, e.g. force has dimensional formula [M L T^-2].
- Principle of homogeneity: only quantities with the same dimensions can be added, subtracted or equated.
- Dimensional analysis can check equations and deduce relations, but it cannot find dimensionless constants or tell apart quantities with the same dimensions.
Important questions
A length is reported as 4.700 m. How many significant figures does it have, and how should it be written in millimetres without changing that?
It has 4 significant figures (the trailing zeros after the decimal point count). Written as 4700 mm it would look like 2 significant figures, so write 4.700 × 10³ mm to keep all four.
Two masses 25.37 g and 9.2 g are measured. Report their difference correctly.
25.37 − 9.2 = 16.17 g. In subtraction the answer keeps the fewest decimal places (one, from 9.2), so the difference is 16.2 g.
Check the dimensional consistency of v = u + at.
[v] = [u] = [L T^-1]; [at] = [L T^-2][T] = [L T^-1]. Every term has the same dimensions, so the equation is dimensionally consistent.
State the order of magnitude of (a) 4.2 × 10^5 m and (b) 7.4 × 10^-3 kg.
(a) 4.2 ≤ 5, so it is of the order of 10^5 m: order 5. (b) 7.4 > 5 rounds to 10, so it is of the order of 10^-2 kg: order −2.
Round 6.735 and 6.725 to three significant figures.
The dropped digit is exactly 5 in both. In 6.735 the preceding digit 3 is odd, so raise it: 6.74. In 6.725 the preceding digit 2 is even, so drop the 5: 6.72.
The period T of a simple pendulum may depend on its length l and the acceleration due to gravity g. Find the form of the relation by the method of dimensions.
Let T = k l^x g^y. Then [T] = [L]^x [L T^-2]^y = [L^(x+y) T^(-2y)]. So −2y = 1 gives y = −1/2 and x + y = 0 gives x = 1/2. Hence T = k√(l/g). The constant k (= 2π) cannot be found by this method.
Using dimensions, convert 1 newton into dyne (the CGS unit of force).
Force has dimensions [M L T^-2]. n2 = 1 × (1 kg/1 g)^1 × (1 m/1 cm)^1 × (1 s/1 s)^-2 = 10^3 × 10^2 = 10^5. So 1 N = 10^5 dyne.
A rectangular plate measures 3.25 m by 1.4 m. Report its area with the correct significant figures.
3.25 × 1.4 = 4.55 m². The factor 1.4 has only 2 significant figures, so the area is 4.6 m².
A sheet has l = 20.0 ± 0.1 cm and b = 10.0 ± 0.1 cm. Find the percentage error in its area and report the area.
Percentage error in l = 0.1/20.0 × 100 = 0.5%; in b = 0.1/10.0 × 100 = 1%. For a product the percentage errors add: 1.5%. Area = 200 cm², error = 1.5% of 200 = 3 cm², so area = 200 ± 3 cm².
Why is an equation that passes the dimension test not necessarily correct?
Dimensional analysis ignores pure numbers. For example s = ut + (1/3)at² has correct dimensions but the true factor is 1/2. A dimensionally wrong equation must be wrong, but a dimensionally correct one is only possibly right.
MCQs with answers
How many significant figures are there in 0.005020?
- 2
- 3
- 4
- 6
Show answer
Answer: (c) 4
What are the dimensions of solid angle?
- [L²]
- [L^-2]
- [L]
- Dimensionless
Show answer
Answer: (d) Dimensionless
Which is the SI base unit of luminous intensity?
- lumen
- candela
- lux
- watt
Show answer
Answer: (b) candela
The dimensional formula of power is
- [M L² T^-2]
- [M L² T^-3]
- [M L T^-3]
- [M L^-1 T^-2]
Show answer
Answer: (b) [M L² T^-3]
2.6 cm + 0.123 cm, reported correctly, is
- 2.723 cm
- 2.72 cm
- 2.7 cm
- 3 cm
Show answer
Answer: (c) 2.7 cm
Download full PDF notes
Chapter Note
- Units and Measurement - Class 11 Physics Chapter 1 Notes — Free 17-page notes for Class 11 Physics Chapter 1 Units and Measurement (NCERT Part I, 2026-27): SI units, radian and steradian, significant figures, rounding off, uncertainty, dimensions and… Read details of Units and Measurement - Class 11 Physics Chapter 1 Notes
Frequently asked questions
What is in Class 11 Physics Chapter 1 Units and Measurement?
The chapter covers units and systems of units, the SI system with its seven base units, radian and steradian, significant figures and rounding off, uncertainty in calculated results, dimensions, dimensional formulae and equations, and dimensional analysis.
What are the 7 SI base units in Class 11 Physics?
Metre (length), kilogram (mass), second (time), ampere (electric current), kelvin (thermodynamic temperature), mole (amount of substance) and candela (luminous intensity).
Are errors in measurement in the Class 11 Units and Measurement syllabus for 2026-27?
The rationalised NCERT chapter keeps the uncertainty in the results of calculations and relative error, but the older sections on types of errors and measuring instruments are not part of the current chapter.
What are the limitations of dimensional analysis Class 11?
It cannot find dimensionless constants such as 1/2 or 2π, it cannot tell apart quantities with the same dimensions, and it only tests the dimensional validity of an equation, not whether the exact relation is right.
Where can I download Class 11 Physics Chapter 1 notes PDF free?
Free Units and Measurement chapter notes with worked examples and board-pattern questions are listed on this chapter page under the study materials.