Class 9 · Physics
Chapter 10: Sound Waves: Characteristics and Applications
Class 9 Physics notes: summary, key points, important questions and MCQs.
Chapter summary
Sound is the Class 9 Science chapter (titled Sound Waves: Characteristics and Applications in the study material) that explains how sound is produced, how it travels and how it is used. This page is based on a 27-page set of 104 flash cards in eleven topics: production of sound, propagation, sound waves, energy of sound waves, graphical representation, wavelength, frequency and time period, amplitude and intensity, speed of sound, human perception of sound, reflection (echo and reverberation), and ultrasonic and infrasonic waves, followed by quick revision cards. Students learn that sound is produced by vibrating objects and needs a material medium, so it cannot travel through a vacuum. Sound is a longitudinal mechanical wave made of compressions and rarefactions, and it carries energy, not particles. The cards define wavelength, frequency, time period and amplitude, link them through v = νλ and ν = 1/T, and compare the speed of sound in steel, water and air. Pitch, loudness, decibels, timbre and octaves explain how we perceive sound, while echoes, SONAR and ultrasound show how reflected sound is used to measure distances and see inside the body.
Key points and definitions
- Sound is produced by vibrating objects such as strings, membranes, air columns and human vocal cords.
- Sound needs a material medium (solid, liquid or gas) and cannot travel through a vacuum.
- Sound is a longitudinal mechanical wave: particles vibrate parallel to the direction of travel, forming compressions and rarefactions.
- A sound wave transfers energy through the medium; the particles themselves only oscillate about their mean positions.
- Wavelength λ is the distance between two consecutive compressions (or crests); frequency ν is the number of oscillations per second, in hertz.
- Time period T = 1/ν, and the speed of sound v = νλ.
- Sound travels fastest in solids and slowest in gases; it also travels faster in warmer, more humid air.
- Larger amplitude means more energy and a louder sound; loudness is commonly measured in decibels (dB).
- Humans hear about 20 Hz to 20 kHz; below 20 Hz is infrasonic and above 20 kHz is ultrasonic.
- For a clear echo the reflecting surface must be at least about 17 m away in air, so the reflected sound arrives 0.1 s or more later.
- Distance from echo or SONAR timing is d = v × t / 2, because the sound travels there and back.
Important questions
How can you show that a vibrating tuning fork is producing sound?
Touch a prong to the surface of water. The water splashes and forms waves, showing that the prongs are vibrating.
Can two astronauts on a spacewalk hear each other speak directly?
No. Space is almost a vacuum, so sound cannot travel; they communicate through radio devices in their spacesuits.
10 density oscillations occur at a point in 2 s. Find the frequency and time period.
Frequency = 10/2 = 5 Hz and time period T = 1/5 = 0.2 s.
Human hearing spans 20 Hz to 20 kHz. Find the corresponding wavelengths in air if v = 344 m/s.
λ = v/ν gives 344/20 = 17.2 m and 344/20,000 ≈ 0.0172 m = 1.72 cm.
A sound wave of wavelength 3.44 m travels at 344 m/s. Find its frequency and time period.
ν = 344/3.44 = 100 Hz and T = 1/100 = 0.01 s.
Thunder is heard 5 s after a lightning flash. How far away was the strike (v = 340 m/s)?
Light arrives almost instantly, so d = 340 × 5 = 1700 m = 1.7 km.
A girl 340 m away along a steel fence hears a knock through both air and steel. Find the time gap (air 340 m/s, steel 5000 m/s).
Through air 1 s; through steel 0.068 s. The gap of about 0.93 s is more than 0.1 s, so she hears two separate sounds.
You clap in an empty corridor and hear the echo after 0.5 s. How far is the wall (v = 340 m/s)?
d = v × t / 2 = 340 × 0.5 / 2 = 85 m.
A SONAR pulse takes 4 s to return from the ocean floor (v = 1500 m/s). Find the depth.
Depth = 1500 × 4 / 2 = 3000 m.
Why does a boy's voice become deeper during adolescence?
His vocal cords become longer and thicker, so they vibrate at a lower frequency, giving a lower pitch.
MCQs with answers
Sound cannot travel through
- steel
- water
- air
- a vacuum
Show answer
Answer: (d) a vacuum
Sound waves in air are
- transverse waves
- longitudinal waves
- electromagnetic waves
- not waves at all
Show answer
Answer: (b) longitudinal waves
If 20 compressions pass a point in 4 seconds, the frequency is
- 80 Hz
- 5 Hz
- 10 Hz
- 0.2 Hz
Show answer
Answer: (b) 5 Hz
Increasing the frequency of a sound in the same medium will
- increase its wavelength
- increase its speed
- increase the number of compressions per second
- increase its time period
Show answer
Answer: (c) increase the number of compressions per second
Sound of frequency above 20 kHz is called
- infrasonic
- audible
- ultrasonic
- supersonic
Show answer
Answer: (c) ultrasonic
Download full PDF notes
Question Bank
- SOUND - Class 9 Chemistry Notes — Qtutor Master Competency Question Bank & Exam Strategy Read details of SOUND - Class 9 Chemistry Notes
flash cards
- Sound Waves: Characteristics and Applications - Class 9 physics Notes — quick revision notes Read details of Sound Waves: Characteristics and Applications - Class 9 physics Notes
Frequently asked questions
What does this Sound flash-card PDF contain?
It has 104 flash cards on 27 pages covering production and propagation of sound, wave properties, speed of sound, hearing, echoes, reverberation, SONAR and ultrasound, with many solved numericals.
Why does sound travel faster in solids than in air?
The particles in a solid are packed closely and strongly bound, so the vibration is passed on more quickly than in a gas.
Why do we divide by 2 in echo and SONAR problems?
The measured time is for the sound to go to the reflector and come back, so the one-way distance is half of speed × time.
What is the difference between loudness and pitch?
Loudness depends on the amplitude of the wave, while pitch depends on its frequency. A loud sound can have a low pitch and a soft sound can have a high pitch.
